Teracom Pt100 transmitter with 1-Wire Interface TST200

Teracom Pt100 transmitter with 1-Wire Interface TST200

Model: TST200


Model TST200

Short Description

TST200 is a Pt100 transmitter with 1-Wire Interface. It is designed to connect Pt100 temperature sensors to TCW2xx and TCG1xx controllers to build temperature monitoring systems in -200 to +850° C (-328 to 1560° F) range. The 1-Wire Pt100 transmitter incorporates a precision, 24-bit, analog-to-digital converter (ADC) and further digital signal processing to ensure accurate drift free performance.

RTD (Resistance Temperature Detector) commonly referred to as Pt100 is one of the most popular temperature sensors used in industry. In principle, the sensor can be connected with 2, 3 or 4 wires. The more wires are used, the more accurate the measurement is. The difference becomes significant at longer distances. The 4-wire connection is highly recommended.

TST200 has two RJ11 connectors, for easy daisy chaining the 1-Wire bus.


* Wide measured temperature range from -200 to +850°C
* 24-bit measurement conversation
* Factory calibrated output data
* 3 and 4 wires sensor connections support
* Very low current consumption
* No external power supply – powered over the interface




Characteristic Data
Supply voltage range (1-Wire bus) 3.5 to 5.5 V
Maximum supply current (1-Wire bus) 6 mA
Measurement temperature range -200 to +850 °C
Accuracy 0.2 °C ± 0.05 % of reading
Dimensions 85 x 35.1 x 23.5 mm
Operating temperature range -20 to +55 °C
Operating relative humidity range 5 to 85 %RH (non-condensing)


Warranty period: 3 years

Click here for Rack Mount Kit: Link

Click here for Din Rail Mounting Kit: Link

Click here for Example application: Link

Click here for Manual: Link

Please click below for complete product information at Teracom.


Quick buy with PayPal