Teracom Digital humidity and temperature sensor TSH206v3

Teracom Digital humidity and temperature sensor TSH206v3

Model: TSH206v3


Model TSH206v3

Short Description

With one of Teracom Ethernet or GSM controllers, the TSH206v3 is an ideal choice for humidity monitoring of server rooms, data centers, offices, stores etc.

The digital humidity and temperature sensor integrates basic elements as well as signal processing and provides a fully calibrated digital output. This results in superior measurement quality.

The TSH206v2 communicates over a 1-Wire bus. Each sensor has a unique 64-bit serial code, which allows multi-sensor support on the same 1-Wire bus.

The digital humidity sensor utilizes two RJ11 connectors for easy daisy-chain wiring. A special accessory, allows easy installation in 19” cabinets, and can be ordered separately.

The digital humidity sensor can be used with

* Ethernet IO module TCW241
* Ethernet data logger TCW220
* Remote IO module TCW122B-CM
* IP watchdog relay board TCW112-WD
* IP watchdog monitoring module TCW122B-WD
* GSM-GPRS remote monitoring controller TCG120
* Remote environmental monitoring module TCW112-CM


* 3.0% relative humidity accuracy
* 12 bit resolution for humidity measurements
* 14 bit resolution for temperature measurements
* Easy 19” cabinet installation
* Excellent long-term stability
* Unique 64-Bit serial number for multi-sensors support

Technical Parameters

Operating Range: 10 to 90%RH non-condensing
Operating Range: Temperature –20 to +60 °C

* Recommended operating range is 20% to 80% RH (non-condensing) over -10°C to +60°C. Prolonged operation beyond these ranges may result in a shift of sensor reading, with slow recovery time.

Accuracy: (max) ±3.0%RH 20 to 80%RH
Accuracy: (max) Temperature ±0.4°C -10 to +60°C
Accuracy: (max) ±5.0%RH 10 to 90%RH
Accuracy: (max) Temperature ±1.0 °C -20 to +60°C
Resolution: 0.1%RH, 0.1°C
Supply voltage: (+VDD) 4 to 5.5 VDC From 1-Wire bus
Max Input Current: 5 mA From 1-Wire bus
Ingress protection: IP20
Head's dimensions: 85 x 35.1 x 23.5mm
Connectors: Two RJ-11 in parallel

Warranty period: 3 years

Sensor Comparison Table: Link

Click here for Rack Mount Kit: Link

Click here for Din Rail Mounting Kit: Link

Click here for Example application: Link

Click here for Manual: Link

Please click below for complete product information at Teracom.

Quick buy with PayPal