Teracom 1-Wire temperature sensor TST100

Model TST100



Digital temperature sensor with aluminum head, for indoor and outdoor usage with IP protection of 65.

Short Description

The temperature sensor integrates a band-gap temperature sensor element as well as signal processing for a fully calibrated digital output. The digital signal processing allows accuracy as low as ±0.5°C.

The sensor uses 1-Wire interface for communication. Each sensor has a unique 64-bit serial code, as a result, multiple sensors can be used on the same 1-Wire bus.

The TST100 measures temperatures in the range from -40 to +85°C (-40 to 185°F). The temperature sensor uses a special flat aluminum head, for direct object assembly. The direct assembly ensures low thermal resistance, and fast response of the system.

The temperature sensor has a one-meter cable with soldered wires for direct connection to the screw terminals of the controller.

Features

* ±0.5°C accuracy from -10°C to +85°C;
* 12 bits resolutions;
* Aluminum head for low thermal resistance;
* IP65 ingress protection;
* Very low current consumption;
* Each device has a unique 64-Bit serial number.

The TST100 temperature sensor can be used with:

* Ethernet IO module TCW241
* Ethernet data logger TCW220
* Remote IO module TCW122B-CM
* GSM-GPRS remote monitoring controller TCG120
* IP watchdog monitoring module TCW122B-WD
* Remote environmental monitoring module TCW112-CM
* IP watchdog relay board TCW112-WD

Sensor Comparison Table:

Click here for Manual:

Click here for Wiring example:

Please click below for complete product information at Teracom.