Teracom Remote environmental monitoring board TCW112-CM


Model TCW112-CM

The TCW112-CM is a remote environmental monitoring board with SNMP v.1 support.

Short Description

The TCW112-CM is designed to be managed by WEB interface, SNMP programs, and user applications over HTTP/XML API commands.

The remote environmental monitoring board can be used as a standalone device or as part of control and monitoring systems.

The board supports one digital and one analog input. Its relay has normally open and normally closed contacts. The relay can be activated remotely (WEB, SNMP, API, etc.) and locally from the status of monitored parameter – temperature, humidity, analog voltage and status of digital input. For every monitored parameter e-mail and/or SNMP a trap can be sent if it goes outside a previously set-up range.


* Smart temperature and humidity monitoring and control
* Password protected web based configuration and control
* 1 digital input with “dry contact” and “logic level” modes
* 1 analog input with 0 to 60VDC range
* 1 relay output with NO and NC contacts
* Long 1-Wire support for 1 temperature sensor TST1XX or 1 temperature/humidity sensor TSH2xx
* SNMP v.1
* SNMP traps sending for alert conditions
* E-mail sending for alert conditions
* SMTP with authentication (SSL is not supported)
* HTTP and XML API commands
* Remote FTP firmware update

Power Supply: 12V 500mA UL-Listed Power Adapter, 100 - 240VAC to 12VDC, .5A
If a power supply is needed please order Model PS-18964 with the TCW122-WD.

Warranty period: 3 years

Click here for Example application:

Click here for product manual:

Please click below for complete product information at Teracom.

  • Model: TCW112-CM
  • Shipping Weight: 1lbs
  • Manufactured by: Teracom