Industrial RFID switch Locky-BF


Model Locky-BF

Short Description

The Locky-BF is an industrial RFID switch activated with 125kHz and EM4102 compatible tags. The device utilizes main parts of an access control system – reading antenna, microprocessor and output relay. The relay of the switch is activated or deactivated from a valid tag, put in the range of the antenna. The status of the device alternates on every valid tag approach and stays stable at the time, until next valid tag approach.

Industrial RFID switch Locky-BF has two hardware versions for different supply voltages. Standard Locky-BF works from 8 to 15VDC, while Locky-BF-40 has an extended supply voltage range from 8 to 40VDC.

Locky-BF can be set up with the service tag, but more powerful and recommended is to do this with Windows based LockyMonitor2 software.


* Memory for up to 500 valid tags;
* Compact design for easy installation;
* Asynchronous interface for PC control;
* Low power consumption. .


Supply voltage for Locky-BF-------------------8-15VDC
Supply voltage for Locky-BF-40----------------8-40VDC
Maximum consumption /with activated relay/---180mA @ 12VDC
Maximum switchable voltage/current------------60V / 0.3A
Dimmensions-----------------------------------Ø 38mm x 36mm
Operating temperature-------------------------from -10 to +40 С°
Reading distance-------------------------------at least 3cm
RFID tags--------------------------------------125kHz, EM4102 compatible
Non volatile memory----------------------------for up to 500 tags


* Service card programming – adding and group deleting of RFID tags
* PC programming – software LockyMonitor2
* ”Credit” mode – every tag has previous set up number of usage
* ”Statistic” mode – there is a counter of usage for every tag

Click here for Manual:

Please click below for complete product information.

  • Model: Industrial RFID switch Locky-BF
  • Manufactured by: Teracom