Industrial RFID controller Locky-CT-RS


Model Industrial RFID controller Locky-CT-RS

Short Description

The Locky-CT-RS is an industrial RFID controller, designed to work as an access control terminal. It works with 125kHz, EM4102 compatible tags. It utilizes main parts of an access control system – reading antenna, microprocessor and output relay.

Every approached tag is checked and if it is valid (already programmed in the memory of the device) the relay is activated and it can switch an electric lock.

Relay activation can be set up from 5 to 240 seconds with LockyMonitor2 software. The Locky-CT-RS has compact design – industrial standard Ø 22mm. The device is waterproof. It supports standard asynchronous interface RS-232.

The Locky-CT-RS can be set up either with a service card or with Windows based LockyMonitor2 software. The second variant is more powerful and recommended


* Industrial standard Ø 22mm case;
* Standard RS-232 interface for PC or PLC communication
* Low power consumption;
* IP65 ingress protection.


* Service card programming – adding and group deleting of RFID tags
* PC programming – software LockyMonitor2
* ”Credit” mode – every tag has previous set up number of usage
* ”Statistic” mode – there is a counter of usage for every tag

Click here for Manual:

Please click below for complete product information.

  • Model: RFID controller Locky-CT-RS
  • Manufactured by: Teracom